Categories FAQ

Question: Bmw n54 oil change?

How much oil does N54 take?

BMW 335 engine oil capacity

Engine Capacity/Filter capacity litres(liters)
335i (2007 – 2010) N54 6.5
335xi (2007 – 2008) N54 6.5
335i xDrive (2008 – 2010) N54 6.5
335i (2010 – 2013) N55 B30 6.5

What oil does N54 take?

BMW 5W30. Castrol Edge Sport 0W40 is highly recommended. I’ve used German Castrol 0w-30 in m54 and recently n54 powered Bmw’s with good results. LL-01 approved, a good fit for a direct injected engine as well, less blow by as a group iv oil.

What oil does 335i use?

5W-30 Pento High Performance is a fully synthetic high performance engine oil, developed for the most recent vehicles with extended oil service intervals. Pento HP can be used in all gasoline and diesel engines containing turbochargers as well as non-turbocharged vehicles requiring 5W-30.

How long does a N54 engine last?

Kinda hard to tell being that the N54 is still a relatively new platform. If you maintain your car properly you should have no problems up to 100K.

You might be interested:  Question: 2005 cadillac sts v6 review?

What’s the best oil for BMW?

That’s why Pennzoil is the recommended supplier of genuine BMW Engine Oil in North America. The Original BMW Engine Oil formulated with Pennzoil® PurePlus® Technology is a synthetic motor oil made from natural gas that delivers enhanced engine protection and performance.

How many quarts of oil does a BMW?

Most engines require anywhere between 5 to 8 quarts of oil. For example, a 4-cylinder engine will require at least 5 quarts of oil and a 6-cylinder engine will require around 6 quarts of motor oil. Give Richmond BMW a call today and ask for one of our service advisers for more information.

Can I put 5w40 in my BMW?

BMW says you can use an: 0w40, 0w30, 5w30 or a 5w40 LL-1 oil in the USA. Btw you can also use a LL-4 rated oil where a LL-1 oil is spec’d, but not vice versa! Maybe who ever changed you oil put too much oil in the engine.

How many quarts of oil does a 2007 BMW 335i take?

It takes 7 quarts. SEVEN.

What kind of oil does a 2009 BMW 335i take?

Engine Oil

Viscosity: All TEMPS.5W-30, 0W-30
Capacity: With filter 6.9 quartsAfter refill check oil level.
Torque: Oil Drain PlugM12x1.5 – 19 ft/lbs Oil Drain PlugM18x1.5 – 26 ft/lbs Oil Drain PlugM22x1.5 – 45 ft/lbs

What is the difference between 5w30 and 5w40 oil?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.

You might be interested:  Question: Used audi q7 san diego?

Can I use 0W40 instead of 5w30?

When it gets hot it’s entirely different, the 5W30 would do a better job because of it’s thick viscosity, it will take more time for it to get thinner than the 0W40 that is thinner. Though both would work very well in Africa, but the 5W30 would do a better job in Africa and the 0W40 will deliver more in Europe.

Can I use 10w30 instead of 5w30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

How reliable is N54 engine?

Putting aside the early issues the N54 and N55 are both relatively reliable engines. Some of the supporting hardware such as valve cover gaskets and water pumps are common issues on each, and will likely be for the distant future. After all, BMW isn’t targeting customers looking for the most reliable cars on the road.

What cars had the N54?

The N54 debuted at the 2006 Geneva Motor Show and was launched in the 335i model of the E90/E91/E92/E93 3 Series range.



225 kW version

  • 2006–2010 E90/E91/E92/E93 335i.
  • 2007–2010 E60/E61 535i.
  • 2007–2010 E82/E88 135i.
  • 2008–2010 E71 X6 xDrive35i.
  • 2009–2016 E89 Z4 sDrive35i.

How much horsepower can a N54 handle?

N54 Engine Limits – Simple Answer



The N54 can handle around 600-650whp and 550-600wtq on the stock block and internals.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *