Categories FAQ

Question: 2007 bmw 328i electric water pump?

Where is the water pump on a 2007 BMW 328i?

Locate the water pump attached to the lower right side of the engine block.

How much is a water pump for a BMW 328i?

The average cost for a BMW 328i water pump replacement is between $649 and $728. Labor costs are estimated between $266 and $336 while parts are priced between $383 and $393.

How do I know if my BMW water pump is bad?

Here are 5 signals that a BMW water pump failure is imminent:

  1. Coolant Leaks.
  2. High-Pitched Whining Sounds.
  3. Overheating Engine.
  4. Steam Coming from the Radiator.
  5. Your BMW Is Getting Up There in Miles.

What are signs of bad water pump?

Here are 5 common symptoms of a bad water pump:

  • Coolant Leak at the Front-Center of your Car.
  • Rust, Deposit Buildup, and Corrosion of the Water Pump.
  • Water Pump Pulley is Loose and Making Whining Sounds.
  • Engine is Overheating.
  • Steam Coming from your Radiator.

Can you drive a car with a bad water pump?

However, it not advisable to keep driving a car with a bad water pump because it can lead to overheating which will eventually result in complete damage of your car engine. With a bad water pump in a car, certainly, the car will move but, if you do not act fast by replacing it, it can cause the engine system to fail.

You might be interested:  Quick Answer: Aston martin db models?

When should I replace my BMW water pump?

About Water Pump Replacement



Water pumps are designed to last at least 100,000 miles, however, if your water pump fails, you should replace it with a high-quality original-equipment level unit. Less expensive replacement pumps are available, but they might only have a service life of 30,000 miles.

How long do BMW electric water pumps last?

Not a simple repair, yes, but one, if done correctly, will last another 100,000 miles.

Why do BMW Water Pumps Fail?

BMW water pumps in particular can begin to fail near the 80,000-mile mark. The water pump is made of a plastic material, and over time it’s normal for the plastic to begin cracking and corroding. Other issues with water pumps could be due to problems with the bearing or the impeller pieces.

What happens when my water pump fails?

When the water pump fails completely, it will not be able to circulate coolant through the engine block. This results in an overheating situation and if not repaired or replaced quickly, can cause additional engine damage like cracked cylinder heads, pushed head gaskets, or burnt pistons.

How do I know if my BMW is overheating?

One of the easiest ways to identify an overheating engine is to touch the hood. If it is too hot to touch after 10 seconds, the engine is likely overheating. Another clear indicator of BMW engine overheating is steam escaping from under the hood.

How do you test a water pump on a car?

If you suspect the water pump isn’t working, replace the radiator cap and, using a shop rag to prevent burning your hand, squeeze the upper radiator hose (the one going from the radiator to the engine). With a working water pump, you should feel the surge of coolant as you release the radiator hose.

You might be interested:  Readers ask: Chrysler crossfire brake pads?

Does the water pump have a fuse?

There is not a fuse for the water pump, however this may be caused by a faulty coolant fan switch or potentially a faulty coolant temperature sensor which is responsible for relaying the coolant temperature to the computer which then uses this information for many other things.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *