Categories FAQ

Often asked: Bmw pulley noise?

What noise does a bad pulley make?

Belt squealing



If the surface of the idler pulley wears, or the pulley seizes or binds it may cause the engine belt to squeal as a result of it rubbing against the surface of the pulley. In some instances a bad pulley may bind or slip and cause the belt to squeal when the engine is first started.

What does a bad alternator pulley sound like?

A common sound made by failing alternators is a very high pitched whining noise that you’ll hear when the engine is running. When the RMPs increase, such as when you accelerate, you’ll hear the noise get higher in pitch as the pulley spins faster.

Can you drive with a bad pulley bearing?

A damaged pulley can cause the drive or serpentine belt to dislodge. So, how long can you drive with a bad idler pulley? The safety recommendation is not to drive the car at all and take it to a mechanic immediately. You should be concerned if the vehicle makes squeaking or rattling noises.

You might be interested:  Bmw rear bumper parts?

How much does it cost to fix a tensioner pulley?

Once that pulley is damaged or loose, then you are going to have some issues with your car’s performance. You will pay somewhere between $125 and $380 to have your tensioner pulley replaced. The labor should run between $45 and $155, while parts can cost as little as $85 or as much as $225.

How much does it cost to replace idler pulley?

The total price to replace the idler pulley typically ranges between $80 and $200, with the parts ranging between $40 and $90, and the total labor cost averaged between $40 and $110.

How often should you replace the idler pulley?

An idler pulley is expected to wear over time, and eventually the pulley will fail. Replacement intervals for idler pulleys vary, but are usually within the 50,000 to 100,000 mile range. Replacement often coincides with expected serpentine/accessory belt replacement periods.

Can a bad pulley make a knocking noise?

When the tensioner or tensioner pulley fails, the loss of tension can cause the belt and pulleys to make high-pitched rattling or chirping noises. If the pulley bearing completely fails, it can also cause a squealing or even a grinding noise. Symptom 2: Knocking or slapping. This can cause a slapping or knocking noise.

How do I know if my tensioner pulley bearing is bad?

Grinding or squeaking noise from the belts or tensioner



If the tensioner is loose the belts may squeak or squeal, especially when the engine is first started. It is also possible for the tensioner pulley or bearing to wear out, in which case the vehicle will produce a grinding noise from the pulley.

You might be interested:  Readers ask: Bmw convertible precio?

Is it bad to drive with a bad tensioner pulley?

”It is not safe to drive with a bad belt tensioner because the belt tensioner ensures sufficient tension to power the accessories. As the tensioner wears, the belt can slip at the accessories creating noise, excessive heat at the accessory pulleys, and reduce accessory performance.

Can a bad pulley cause loss of power?

Technically speaking, yes, an idler pulley will result in a slight power loss.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *